Socket 939 Roundup: Battle at the Top
by Wesley Fink on July 30, 2004 8:00 AM EST- Posted in
- Motherboards
MSI K8N Neo2 Platinum: Overclocking and Stress Testing
FSB Overclocking Results
| Front Side Bus Overclocking Testbed | ||
| Processor: | Athlon 64 FX53 Socket 939 2.4GHz |
|
| CPU Voltage: | 1.5V (default) | |
| Cooling: | Thermaltake Silent Boost K8 | |
| Power Supply: | Antec TruePower 430W | |
| Maximum OC: (Standard Ratios) |
204FSBx13 2652MHz (+10.5%) |
|
| Maximum FSB: (Lower Ratio) |
290FSB x 9 (2610) at 1:1 Memory (+10%) | |
The K8N Neo2 allowed our DDR550 memory to reach the highest 1:1 performance that we have tested on any motherboard - P4 or A64. 290 Frequency (1160 FSB/HT) was the limit of our memory and the K8N reached it rather easily. By reducing the memory ratio a bit, we were right at the board limit of 300, and we could likely reach even higher OC levels with a wider range of frequency choices. The MSI K8N Neo2 was clearly the best overclocker of this roundup.
Memory Stress Test Results:
The memory stress test simply checks the ability of the K8N Neo2 to operate at its officially supported memory frequency (400MHz DDR), at the best performing memory timings that our Mushkin PC3500 Level 2 or OCZ PC3500 Platinum Ltd Modules will support. Memory stress testing was conducted by running RAM at 400MHz with 2 DIMM slots filled.| Stable DDR400 Timings - 2 DIMMs (2/4 DIMMs - 1 Dual-Channel Bank) |
|
| Clock Speed: | 200MHz |
| Timing Mode: | N/A |
| CAS Latency: | 2.0 |
| Bank Interleave: | N/A |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 10T* |
| Precharge Delay: | 2T |
| Command Rate: | 1T |
Like the other 939 motherboards in this roundup, the K8N Neo2 was completely stable with 2 DIMMs at the best performing settings of 2-2-2-10 at default speed and 2.6V default voltage. While a full memory comparison of the nVidia and VIA chipsets is beyond the scope of this roundup, we did run several SiSoft Sandra 2004 SP2 runs of the memory test module. At default settings, and the aggressive 2-2-2-10 timings on the FX53, the nF3-250 Ultra showed memory bandwidth in the 6100 range for FPU and Float. The same test on the VIA K8T800 PRO boards showed memory bandwidth in the 6000 range. Performance of both chipsets at the 1T setting was very similar. 2T Command Rates, with everything else the same, generated bandwidths of 4900 to 5000Mb/second.
Filling all four available memory slots is more strenuous on the memory subsystem than testing 2 DIMMs on a motherboard.
| Stable DDR400 Timings - 4 DIMMs (4/4 DIMMs - 2 Dual-Channel Banks) |
|
| Clock Speed: | 200MHz |
| Timing Mode: | N/A |
| CAS Latency: | 2.0 |
| Bank Interleave: | N/A |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 10T* |
| Precharge Delay: | 2T |
| Command Rate: | 2T |
The MSI K8N Neo2 was able to run with all 4 DIMM slots at the same aggressive 2-2-2-10 settings used for 2 DIMMs. However, as we have seen on the other 939 boards running all 4 DIMMs, Command Rate must be reduced to 2T when filling both Dual Channels.
Facebook
Twitter
RSS
83 Comments
View All Comments
jrphoenix - Friday, July 30, 2004 - link
I am using the Gigabyte 939 NF3 board for the past week now. It appears that their are two lan connections listed as Marvell (lan 1) and Nvidia (lan 2). I have been using the Nvidia one?To get the firewall to function with the Gigabyte board all you have to do is download the Nvidia 4 in 1's after installing the Gigabyte drivers.
Of course I'm a noob.
Wesley Fink - Friday, July 30, 2004 - link
#70 - The nVidia fiewall is a port on the chipset that allows for direct communication with the Gigabit chip PHY layer. It is therefore very difficult to determine if the on-chip port is being used just from looking at the specifications.Earlier this week we asked nVidia for help in identifying which motherboards were using the on-chip gigabit port. nVidia is looking into the list of boards we supplied and said they would be providing us with updated information soon. When we receive that info we will post it.
Anemone - Friday, July 30, 2004 - link
Any chance to have tested the OCZ 4000 gold rev 2, with the 2.5-3-3 latencies and compare that to the 3700 EB?Curious as I narrow down things.
Any news on Pci-e for AMD64's?
Thanks!
REMF - Friday, July 30, 2004 - link
i too would like to know whether the Gigabyte NF3 board uses the nVidia NIC/firewall, and if not not, why anandtech failed to mention the fact?geogecko - Thursday, July 29, 2004 - link
What is the noise difference in the retail packaged CPU fans in this class (S-939), and the Thermaltake Silent Boost K8 used in the reviews.I notice that Thermaltake also has another CPU cooler using heatpipes, the SilentTower 4-in-1 CPU Cooler. Have you guys tested this out?
My current PC (AMD XP 1800+ with the equivalent of a Volcano 9) gets too loud for me when it gets warmed up, and that's with it sitting on the floor next to my desk.
Staples - Tuesday, July 27, 2004 - link
#62, you must have read the post incorrectly. I was hoping you would have used the same CPU, which you did not. Somehow you read the opposite. I figure in comparing the chipset to the other, using a different CPU throws in a ton of extra variables. Now if you are looking at it from a prospective of which is faster, then your setup is fair. Of course most people would buy the Northwood on the 875 but it becomes more of a platform benchmark rather than anything that could be called a chipset competition.About the FX53, one reason I do not like you using it is because it is AMD's flagship product and at least from what I remember, the Presscott that you used was not an EE. Even so, the biggest bother is that the FX53 will always cost more than $500 and very few people will actually ever buy it when they can get so much more band for their month with just a regular class AMD64. This is the case with the EE too, they will always cost an arm and a leg so I'd say only about 5% of people will be buying the FX and the EE series chips. By an overwhelming majority, most consumers will be buying the non-enthusiast parts.
bigtoe33 - Tuesday, July 27, 2004 - link
Please take this as the official responce to the rumours about 3500 and 3700EB.We have NOT stopped production of these modules, it sells quicker than we can produce it..that is the only real issue.
We have just shipped another huge order so please go bug your favourite stores to stock it..
EB is here to stay at least for the time being.
Tony
expletive - Monday, July 26, 2004 - link
Also, has the performance discrepancy with Halo and the nforce boards ben figured out yet? If it somehting that may resurface in other games ill get an nforce board. If it is fixable or just a one off with halo, i can save a few $ and get a via board while i am waiting for PCIx...John
expletive - Monday, July 26, 2004 - link
Does the Gigabyte board use the Nvidia LAN as well? I see it says marvel but after the last series of posts with the marvell/nvidia chipset i am confused now...Anemone - Monday, July 26, 2004 - link
Thank you for enlightening on the LAN issue with the NF3 ultra - for me I'm getting and FX.Since this article is getting referenced a lot with people I talk with and such, can we keep a front page link to it for a while?
Also looking forward to memory reviews as well. Rather sad the 3700EB has been discontinued :(
Hopefully OCZ will have something better to take its place in not too long, but that might be impossible.