Socket 939 Roundup: Battle at the Top
by Wesley Fink on July 30, 2004 8:00 AM EST- Posted in
- Motherboards
Gigabyte K8NSNXP-939: Overclocking and Stress Testing
FSB Overclocking Results
| Front Side Bus Overclocking Testbed | ||
| Processor: | Athlon 64 FX53 Socket 939 2.4GHz |
|
| CPU Voltage: | 1.5V (default) | |
| Cooling: | Thermaltake Silent Boost K8 | |
| Power Supply: | Antec TruePower 430W | |
| Maximum OC: (Standard Ratios) |
204FSB x13 2652MHz (+10.5%) |
|
| Maximum FSB: (Lower Ratio) |
267FSB x 9 at 1:1 Memory | |
Our FX53 easily achieved the next speed level of 2.6GHz on the Gigabyte. In fact, the two nVidia nF3 boards tied for the highest overclock of this FX53 at 2652MHz. This is a bit faster than the 2.6GHz, which will likely be the speed rating of the FX55 to appear later this year. On recent Gigabyte boards, the BIOS overclocks have been more modest, with the rest of the overclock only doable with EZTune in Windows. It is good to see Gigabyte allowing a higher OC in BIOS, since we could achieve 267 in BIOS at lower multipliers. However, any higher value requires EZTune after booting into the OS. We still did not reach spectacular levels with EZTune, topping out about 280, but these levels should be more than enough to satisfy most users.
Memory Stress Test Results:
Since you need a score card for Dual Channel setup on 939, DIMMs 1 and 2 are the first DC bank on the Gigabyte, and yes, this can be very confusing. Our advice is to check memory and your start-up screen carefully to make sure that you are really in Dual-Channel mode when setting up a 939. Everyone seems to be doing it differently.The memory stress test is very basic, as it simply tests the ability of the Gigabyte K8NSNXP-939 to operate at its officially supported memory frequency (400MHz DDR), at the best performing memory timings that our Mushkin PC3500 Level 2 or OCZ PC3500 Platinum Ltd Modules will support. Memory stress testing was conducted by running RAM at 400MHz with 2 DIMM slots in a Dual-Channel configuration.
| Stable DDR400 Timings - 2 DIMMs (2/4 DIMMs - 1 Dual-Channel Bank) |
|
| Clock Speed: | 200MHz |
| Timing Mode: | N/A |
| CAS Latency: | 2.0 |
| Bank Interleave: | N/A |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 10T* |
| Precharge Delay: | 2T |
| Command Rate: | 1T |
The Gigabyte 939 was completely stable with two DIMMs in Dual-Channel mode at the best 1T Command Rate settings.
Filling all four available memory slots is more strenuous on the memory subsystem than testing 2 DIMMs on a motherboard.
| Stable DDR400 Timings - 4 DIMMs (4/4 DIMMs - 2 Dual-Channel Banks) |
|
| Clock Speed: | 200MHz |
| Timing Mode: | N/A |
| CAS Latency: | 2.0 |
| Bank Interleave: | N/A |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 10T* |
| Precharge Delay: | 2T |
| Command Rate: | 2T |
The K8NSNXP-939 was able to run with all 4 DIMM slots at the same aggressive 2-2-2-10 settings used for 2 DIMMs. However, as we have seen on the other 939 boards running all 4 DIMMs, Command Rate must be reduced to 2T when filling both Dual Channels.
Facebook
Twitter
RSS
83 Comments
View All Comments
Richdog - Wednesday, July 21, 2004 - link
bigtoe33 - Wednesday, July 21, 2004 - link
If you are looking for the K8NN939 beta M03 again its availabale at bleedinedge.com on bigtoe's bios bin.http://www.bleedinedge.com/forum/showpost.php?p=32...
grdh20 - Wednesday, July 21, 2004 - link
http://forum.abit-usa.com/attachment.php?s=&po...abit av8 1.3 bios link
grdh20 - Wednesday, July 21, 2004 - link
The msi K8N Neo2 will hit the states in 2 weeks according to MSI.How will the A8V rev. 2.0 be sold in terms of order by model #. Same or different? Rev. # is only printed on the PCB, not the box.
Brickster - Wednesday, July 21, 2004 - link
I love my new Gigabyte 939 board! It kicks a*s and is perrrty in the dark! :)Wesley Fink - Wednesday, July 21, 2004 - link
#36 - The new Gigabyte BIOS DOES have multipliers in BIOS as I detailed in the review specifications. See the link in #35.RyanVM - Wednesday, July 21, 2004 - link
With performance getting so similar between the various boards/chipsets, it seems to me that AT is overlooking some of the bigger differentiating factors: integrated features. It would be nice to see how the USB, Firewire, IDE/SATA, Ethernet, Sound, etc. implementations differ in CPU utilization and overall performance.For example, the Gigabyte (inexplicably) uses a 3rd party GigE controller instead of the NF3-250's controller. What impact on throughput/CPU utilization does this have? How is VIA's SATA implementation compared to nVidia's?
It seems to me that those are become more relevant of questions than "Which board has a higher Winstone rating?"
Parc - Wednesday, July 21, 2004 - link
I had heard the Gigabyte board would not let you adjust the multipler in the bios but I saw a picture where it could be adjusted from the software in windows? Is this true? Any disadvantages to this? Also just how bad is the voltage limit holding the Gigabyte board back? Is there anyway Gigabyte could allow you any more voltage adjusts through the bios in the future or is this board hopeless for volts?bigtoe33 - Wednesday, July 21, 2004 - link
For all who want the AV8 bios...first join the forums over at www.bleedinedge.com, then look in bigtoe's bios bin. you will find the bios under abit amd boards.http://www.bleedinedge.com/forum/showpost.php?p=32...
Wesley Fink - Wednesday, July 21, 2004 - link
#31 - A friend will post a host for the BIOS soon, as I can't handle all the individual requests. Until then email me and I will be happy to send it to you.#32 & #33 - The Socket 939 boards WILL handle ECC and non-ECC memory, but I suspect the question is larger than this. Socket 940/Opteron requires REGISTERED memory and the ECC can be on or off. We have tested the 939 with Registered memory and it is definitely NOT compatable with Registered memory. If you want to keep using Registered memory (Which you may have bought for 940) you will have to stick with an Opteron.