nForce4 SLI Roundup: Painful and Rewarding
by Wesley Fink on February 28, 2005 7:00 AM EST- Posted in
- Motherboards
DFI LANParty nF4 SLI-DR: Overclocking and Stress Testing
Overclocking
| Front Side Bus Overclocking Testbed | |
| DFI LANParty nF4 SLI-DR | |
| Processor: | Athlon 64 4000+ (2.4GHz, 1MB Cache) |
| CPU Voltage: | 1.55V (default 1.50V) |
| Cooling: | Thermaltake Silent Boost K8 Heat sink/Fan |
| Power Supply: | OCZ Power Stream 520W |
| Memory: | OOCZ PC3200 EL Platinum Rev. 2 (Samsung TCCD Memory Chips) |
| Hard Drive: | Seagate 120GB 7200RPM SATA 8MB Cache |
| Maximum OC: (Standard Ratio) |
238x12 (Auto HT, 2-3-2-7, 1T, 2.9V) 2856MHz (+19%) |
| Maximum FSB: (Lower Ratio) |
318x9 (2862MHz) (Auto HT, 2.5-4-3-7, 2.9V) (1:1 Memory, 1T, 2 DIMMs in DC mode) (+59% Bus Overclock) |
The DFI nForce4 boards set new records with this CPU and memory - reaching the highest overclocks at stock speed and at a lower mulitiplier that we have ever tested with this combination. We reached a very satisfying 318 (DDR636) at 1T, at the rather aggressive memory timings of 2.5-4-3-7 with our standard OCZ PC3200 Platinum Rev.2, which is based on Samsung TCCD chips.
As we detailed in our DFI review, DDR636 translated into a Quake 3 ran at 642FPS and SiSoft Sandra 2004 standard memory bandwidth was 8,300 MB/s. The Sandra unbuffered memory bandwidth was at 4000 MB/s. All these results are new performance records in our memory testing. The very wide range of memory voltages to 4.0V is particularly useful in reaching the highest possible overclocks, along with a very complete set of memory tweaking options in the BIOS. There is still a huge reserve in the available memory voltage range as we only needed 2.9V to reach these performance levels. Those with exotic cooling will appreciate that the CPU voltage and memory voltage settings on the DFI will give them what they need to squeeze every bit of performance from their CPU and memory.
Memory Stress Tests
Our memory stress test measures the ability of the DFI to operate at its officially supported memory frequency (400MHz DDR), at the lowest memory timings that OCZ PC3200 Platinum Rev. 2 modules will support. All DIMMs used for stress testing were 512MB double-sided (or double-bank) memory. To make sure memory performed properly in Dual-Channel mode, memory was only tested using either one dual-channel (2 DIMMs) or 2 dual-channels (4 DIMMs).| Stable DDR400 Timings - One Dual-Channel (2/4 DIMMs populated) |
|
| Clock Speed: | 200MHz |
| CAS Latency: | 2.0 |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 7T |
| Precharge Delay: | 2T |
| Command Rate: | 1T |
Using two DIMMs in Dual-Channel 128-bit mode, the memory performed in all benchmarks at the fastest 2-2-2-7 timings at default 2.6V voltage.
Tests with 4 DS DIMMs on an AMD Athlon 64 system are more demanding, since AMD specifies DDR333 for this combination. However, most AMD Athlon 64 motherboards combined with recent AMD processors (the memory controller is on the AMD CPU) have been able to handle 4 DIMMs at DDR400.
| Stable DDR400 Timings - 4 DIMMs (4/4 DIMMs populated) |
|
| Clock Speed: | 200MHz |
| CAS Latency: | 2.0 |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 7T |
| Precharge Delay: | 2T |
| Command Rate: | 2T |
Tests with all four DIMM slots populated on the DFI nForce4 boards required a 2T Command Rate with 4 DS DIMMs in two dual channels. This is the pattern seen on other top-performing Socket 939 boards, but we hoped higher voltage might allow us to eek out 4 DS DIMM 1T performance. However, additional voltage did not help and DDR400 with 4 DS DIMMs still required a 2T Command Rate on the DFI nForce4 boards.
Facebook
Twitter
RSS
108 Comments
View All Comments
ajmiles - Wednesday, March 2, 2005 - link
If i was a doubting type I would suggest that Nvidia spent as much time tuning their drivers for benchmarks as they do games.Nice to see support for some unreleased games such as Battlefield 2 on the list though.
Wesley, you get my email btw? (sorry for bugging you)?
Wesley Fink - Wednesday, March 2, 2005 - link
nVidia has just advised the release of Beta 71.84 drivers now supporting 70 games in SLI. The drivers can be downloaded at http://www.nzone.com/object/nzone_downloads_rel70b... Below is a list of suypported games and benchmarks.Age of Mythology
AquaNox 2: Revelation
Armed & Dangerous
Battlefield 1942
Battlefield 2
Battlefield Vietnam
Breed
City of Heroes
Colin McRae Rally 2005
Colin McRae Rally 4
Conan
Dark Age of Camelot: Atlantis
Desert Rats vs. Afrika Korps
Dirt Track Racing 2
Doom 3
EverQuest
EverQuest II
Far Cry
Flat Out
Ground Control II : Operation Exodus
Half-Life 2
Halo
Hitman 2
IL-2 Sturmovik: Forgotten Battles
Joint Operations: Typhoon Rising
Kohan II: Kings of War
Leisure Suit Larry
Lineage II
Lock On
Lord of the Rings, Battle for Middle-earth
Madden NFL 2005
Max Payne 2
Medal of Honor
NBA Live 2005
Need for Speed: Underground 2
Painkiller
Perimeter
Prince of Persia: The Sands of Time
Quake III
Return to Castle Wolfenstein: Enemy Territory
Return to Castle Wolfenstien
Rome: Total War
Serious Sam: The Second Encounter
Sid Meier's Pirates!
Silent Storm
Sims 2
SpellForce
Splinter Cell
Splinter Cell: Chaos Theory
Star Wars Battlefront
Star Wars Jedi Knight: Jedi Academy
Star Wars Jedi Knight II: Jedi Outcast
Star Wars: Knight of the Old Republic
SWAT 4
The Chronicles of Riddick
Thief: Deadly Shadows
Tiger Woods PGA Tour 2005
ToCA Race Driver 2
Tomb Raider: The Angel of Darkness
Tony Hawk's Underground
Tribes Vengeance
Tron 2.0
Unreal
Unreal 2
Unreal Tournament 2003
Unreal Tournament 2004
Vampire: Bloodlines
Warhammer 40,000: Dawn of War
World of Warcraft
X2: the Threat
Xpand Rally
In addition to these top games, NVIDIA SLI supports the following applications:
3DMark01
3DMark03
3DMark05
AquaMark 3
Code Creatures
D3DRightMark
HDRLighting
NVIDIA Clear Sailing Demo
NVIDIA Dawn Demo
NVIDIA Nalu Demo
NVIDIA Timbury Demo
PCMark04
Shadermark 2.1
Trees of Pangaea
giz02 - Wednesday, March 2, 2005 - link
I've done some further testing, and still no luck. The PCStats review also indicated 192Khz output, but I can't find that either. I'm still hoping for something, and will let you guys know if anything comes up.Other points:
+ The onboard Creative can attenuate the digital outputs just like a regular live could. Most onboard solutions that i have used could not
- Cannot have Analog and Digital outs enabled at the same time (at least I haven't found that yet). All other onboard solutions that I have tried were able to do this. An example of what I'd like to do (ideally) is have my Zalman Real Surround headphones plugged in to the analog ports, and the z5500's plugged into the digital (coax/optical). When the GF complains, I could turn the z5500's off, and put on the headphones. With creative you do this BUT you also have to uncheck the digital out only box. If they can bot h be enabled at the same time, let me know (Y)
- Either the Z5500's can't accept 96/24 on the optical in, or the creative isn't outputting 96/24 on the optical out.
- Only Coax or Optical work at one time (with the Z5500's)
- DD and DTS passthroughs work with Videolan and DVD's/.ts's.
I'll try this board for a while longer, but if encode will not work, I'll be heading to DFI. It's a bit more expensive, but you get the Lan Tote (woohhoo!) and the extra PCIx slots. Anyone have any comments on DFI's onboard sound?
EODetroit - Wednesday, March 2, 2005 - link
Thanks giz02. One of these days some manufacturer is going to realize there's demand for this and meet it... I just hope that day comes sooner than later.SLK75 - Tuesday, March 1, 2005 - link
I bought the GA-K8NXP-9 because fo the rave reviews on its OC abilities which Anandtech also proved in their pre-production sample reviewed towards the end of last year...All of a sudden now Gigabyte's production version of the board does not seem to clock high as was expected and proved previously WHYYYY ???? and Anandtech make it really clear to Gigabyte that people went and bought their board not only first its great features but also for its OC capabilities...I hope Gigabyte can address this with a new BIOSgiz02 - Tuesday, March 1, 2005 - link
I feel DUPED by that PCSTATS review. I've asked the reviewer for why he indicated that the board can DICE (either how to do it, or who told him it was possible).The board is .... OK...
I'da rather had the DFI (if DICE is not possible!)
Aquila76 - Tuesday, March 1, 2005 - link
#89 - looks like we'll both still wait for the next SoundStorm. Maybe the next gen of PCI-E sound cards will have DDL?bob661 - Tuesday, March 1, 2005 - link
#89Thanks for the test.
giz02 - Tuesday, March 1, 2005 - link
So far, It's a negative on the DICE :(I have a single coax cable connected from the onboard card to my Z-5500's and they are not recieving Dolby on the speaker tests. Left and Right channels come through but that is is... 96-24 is working as well, but zilch on the 5.1 :(
1955mm - Tuesday, March 1, 2005 - link
#87: AMD has NOT made it clear that ECC is an Opteron only feature. Read the document from the link I posted. As for ASUS not supporting ECC, download the manual and look at pages 4-21 and 4-22. In the screenshot for DRAM configuration there is an item for ECC enablement. The ASUS K8N-E deluxe (socket 754) also supports ECC. If you still have doubts that the Athlon 64 supports ECC, go to crucial.com and see what memory is supported by the ASUS K8N-E deluxe and A8N-SLI deluxe. I think that you might be confusing registered memory with ECC. If you write code work with critical data ECC is worth having. I have had bad memory in the past that corrupted data without crashing the machine. Considering misinformation that is sometimes provided by motherboard manufacturers and your obvious confusion about the Athlon 64, I think that ECC deserves some mention by motherboard reviewers. I myself would like to understand why the A8N-SLI apparently supports 4 256MB ECC memory modules but not 2 512MB ECC memory modules (page 2-12 in manual), Wesley?