Overclocking: Jetway 939GT4-SLI

Front Side Bus Overclocking Testbed
Default Voltage
Processor: Athlon 64 4000+
(2.4GHz, 1MB Cache)
CPU Voltage: 1.55V (default 1.50V)
Cooling: Thermaltake Silent Boost K8 Heat sink/Fan
Power Supply: OCZ Power Stream 520W
Memory: OCZ PC3200 EL Platinum Rev. 2
(Samsung TCCD Memory Chips)
Hard Drive: Seagate 120GB 7200RPM SATA 8MB Cache
Maximum OC:
(Standard Ratio)
244x12 (4x HT, 2.5-3-3-7)
2928MHz (+22%)
Maximum FSB:
(Lower Ratio)
314 x 9 (2563MHz) (3x HT)
(2826MHz, 2 DIMMs in DC mode)
(+57% Bus Overclock)

The Jetway is a very nicely laid out nForce 4 board with excellent adjustments, and we fully expected that we would be recommending the Jetway to those who run at stock or only modestly overclock. Well, our expectations were far too modest!! The Jetway turns out to be one of the best overclocking nForce4 boards that we have ever tested and moves right up there with the DFI SLI and Sapphire/ATI single video Innovation board.

The Jetway turned in one of the highest overclocks at the stock 12X multiplier that we have ever tested at 122% or a 244 CPU clock. Lowering HT to 3X, we also reached one of the highest overclocks that we have ever achieved at lower multipliers by hitting 314 at a 9 multiplier. What's more, the Jetway was exceptionally stable at both overclocks, handling Super Pi and other benchmarks with ease.

Getting to these stratospheric overclocks on air is not as easy as many may think. There are a number of design tricks that the best overclocking boards use to reach these high performance levels, which is why smaller companies often do quite poorly in overclocking. It takes design staff and attention to detail to create a great overclocker - resources that are usually in short supply at smaller companies. We don't know where Jetway purchased this design excellence, but we can tell you that the Jetway 939GT4-SLI is a dynamite overclocker - one of the best that we have tested. With a lower selling price, the Jetway gives AMD shoppers a new choice in an enthusiast-level board.

This brings us back to the earlier question of whether or not the dedicated slots with no paddles, jumpers, or switches might improve performance. It is clear that the Jetway performs very well in overclocking, and if this design is the reason, then others should copy the Jetway design.

Basic Features: Jetway 939GT4-SLI Memory Stress Testing
Comments Locked

46 Comments

View All Comments

  • John - Wednesday, August 24, 2005 - link

    Yes.
  • OvErHeAtInG - Wednesday, August 24, 2005 - link

    In that case the evga deal is amazing.
  • Cygni - Wednesday, August 24, 2005 - link

    Page 1:

    " The outer slots, colored yellow, are configured as x8 slots and can be combined in SLI mode using the included SLI bridge. The middle x16 slot, colored red, is a single x16 PCIe slot."

    Thats not what the picture shows! ;)
  • Furen - Wednesday, August 24, 2005 - link

    I dont think "Overclocking: ULi M1695/M1567" applies to this board... shame on you for using an old review as a template, heh.
  • formulav8 - Wednesday, August 24, 2005 - link

    in the specs page under Bus Speeds: 200 to 40MHz. Hopefully it is 400mhz :)



    Jason
  • formulav8 - Wednesday, August 24, 2005 - link

    Hmm, fairly interesting. Not something I need



    Jason

Log in

Don't have an account? Sign up now