Asus P5N32-SLI: Dual x16 - What Dreams Are Made On . . .
by Gary Key on October 27, 2005 12:05 AM EST- Posted in
- Motherboards
ASUS P5N32-SLI Deluxe: Features
Asus did an excellent job with the color coordination of the various peripheral slots and connectors. The DIMM module slots' color coordination is correct for dual channel setup. The memory modules can be changed with a full size video card in the first PCI Express x16 slot. The power plug placement favors standard ATX case design and the power cable management is very good. Asus places the eight-pin 12V auxiliary power connector at the top of the CPU socket area, but out of the way of any aftermarket cooling solutions.
The nForce4 SATA II ports are located conveniently below the primary IDE connector and feature the new clamp and latch design. Asus did not include the new cable designs in their accessory kit, which greatly enhance the security of the SATA connections. When cables are attached to the top SATA II ports with a 7800GTX installed in the second PCI Express x16 slot, there is a tight fit. I would highly recommend installing the cables before the video card.
The nForce4 USB connectors and TI 1394a Firewire connectors are located below the battery and the adaptor connectors are a tight fit when utilizing the bottom PCI slot. The CMOS reset is a traditional jumper design located next to the BIOS chip and below the SATA II connectors that proved to be inconvenient at times.
In between the two x16 PCI Express slots is the PCI Express x4 slot along with one of the PCI Express x1 slots. The 4-pin 12V EZ plug is also located in this area and has the capability of creating cable clutter when utilized with an SLI setup. However, the full two slot spacing in between the x16 PCI Express slots leaves ample room for upgrading the cooling solutions on a pair of SLI cards. This additional room also provides better air-flow management and allowed our 7800GTX SLI configuration to run up to 4c cooler based upon the NVIDIA control panel temperature utility when compared to other motherboards in the same case and ambient conditions.
The Northbridge and Southbridge chipsets along with the MOFSETs are passively cooled with an excellent copper heat pipe system that does not interfere with any installed peripherals. In fact, this system kept the chipsets cool enough that additional chipset voltage was not a factor in our overclocking tests.
The only oddity in the area is the red Silicon Image 3132 SATA II connector located right above the first PCI Express x1 slot. The location of this connector is not ideal, but is required due to the second Silicon Image 3132 SATA II connector being located on the back I/O panel.
Asus did an excellent job with the color coordination of the various peripheral slots and connectors. The DIMM module slots' color coordination is correct for dual channel setup. The memory modules can be changed with a full size video card in the first PCI Express x16 slot. The power plug placement favors standard ATX case design and the power cable management is very good. Asus places the eight-pin 12V auxiliary power connector at the top of the CPU socket area, but out of the way of any aftermarket cooling solutions.
The nForce4 SATA II ports are located conveniently below the primary IDE connector and feature the new clamp and latch design. Asus did not include the new cable designs in their accessory kit, which greatly enhance the security of the SATA connections. When cables are attached to the top SATA II ports with a 7800GTX installed in the second PCI Express x16 slot, there is a tight fit. I would highly recommend installing the cables before the video card.
The nForce4 USB connectors and TI 1394a Firewire connectors are located below the battery and the adaptor connectors are a tight fit when utilizing the bottom PCI slot. The CMOS reset is a traditional jumper design located next to the BIOS chip and below the SATA II connectors that proved to be inconvenient at times.
In between the two x16 PCI Express slots is the PCI Express x4 slot along with one of the PCI Express x1 slots. The 4-pin 12V EZ plug is also located in this area and has the capability of creating cable clutter when utilized with an SLI setup. However, the full two slot spacing in between the x16 PCI Express slots leaves ample room for upgrading the cooling solutions on a pair of SLI cards. This additional room also provides better air-flow management and allowed our 7800GTX SLI configuration to run up to 4c cooler based upon the NVIDIA control panel temperature utility when compared to other motherboards in the same case and ambient conditions.
The Northbridge and Southbridge chipsets along with the MOFSETs are passively cooled with an excellent copper heat pipe system that does not interfere with any installed peripherals. In fact, this system kept the chipsets cool enough that additional chipset voltage was not a factor in our overclocking tests.
The only oddity in the area is the red Silicon Image 3132 SATA II connector located right above the first PCI Express x1 slot. The location of this connector is not ideal, but is required due to the second Silicon Image 3132 SATA II connector being located on the back I/O panel.
Facebook
Twitter
RSS
70 Comments
View All Comments
Kensei - Friday, October 28, 2005 - link
I just wanted to say that I REALLY appreciate the wonderful combination of a person who is a very, very good writer and technologist. This extremely rare combination makes him one of the best technical writers I've come across in the past 20 years.It's not too hard to find people who are technically competent but very hard to find someone who can communicate well and knows what the hell they're talking about (ask anyone who has been to college). Quite frankly, he sets a standard that I think all AnandTech writers (ok... all technical writers) should strive to eventually achieve. This level of expertise typically takes years of practice to acquire even among the talented. Can't wait for his next article.
To quote the first post..."Mixing philosophy, classical literature and computer hardware reviews? Gotta love it."
Kensei
Gary Key - Monday, October 31, 2005 - link
I greatly appreciate the comments. This was my third article and hopefully I improve with each one although you have now placed a great deal of pressure on me. ;->The next article series will be a multiple board review. I am learning how to convey several different messages in a very condensed form. It will be different than this last article so I would appreciate comments, good or bad. I try my best to listen to the readers and follow up on suggestions.
I have two very good editors in Wes and Karen so it really is a team effort at AnandTech. I still have a great deal to learn and in fact will be taking a composition course this winter to improve my skills.
Kensei - Thursday, November 3, 2005 - link
You are welcome. I don't think you need a composition course so I'd be interested in hearing how much you learned once it's over. Hopefully I'm wrong, but you may be disappointed by the course. If this is a college course, you may find that people in English departments don't quite get technical writing. It's different (although not totally different) than writing good short stories.Keep up the good work and I look forward to your future articles.
Kensei
screwtech02 - Friday, October 28, 2005 - link
So let me get this straight... In "theory" i can run my 820 at a 250fsb or 4.0, with a ddr700 rating?? And the board will recognize both the cores?? I'm tempted to get this board, but after having the previous one from ASUS, i'm scared to death, it was a HORRIBLE overclocker, max i could get was 230fsb, and lousey mem performance.... But if you say this board is different, i may try one....Gary Key - Saturday, October 29, 2005 - link
Email me please and I can forward some testing results to you along with additional information.NegativeEntropy - Friday, October 28, 2005 - link
Please check your USB/Firewire/Ethernet throughput graphs for their use of MB (MegaByte) vs Mb (Megabit).Nice board :)
Gary Key - Friday, October 28, 2005 - link
I have corrected the charts. Thank you for noticing the issue. Sometimes you view something so much that you miss the obvious. :)noac - Friday, October 28, 2005 - link
I read that you thought most would fit - "an excellent amount of room for alternative cooling solutions". Im wondering more specifically if the Scythe Ninja will fit with/without the optional fans. BTW did you test them, the fans? Wondering how much noise they make and if they work well.Gary Key - Friday, October 28, 2005 - link
I do not have the Ninja although I know where to get one for a test. :) I received the optional fans a couple of days ago from Asus (tried to get them before publishing but it did not work out). I will try them this weekend and respond to your questions. They are designed to be used with watercooling or phase change setups. The stock Intel 840EE cooler (upgraded from other Pentium D units) provided enough air flow in the area to keep the MOFSETs cool. The aftermarket coolers I used provided more than enough air flow and fit great within the CPU area. Let me know if you need a listing of these heatsinks.yacoub - Thursday, October 27, 2005 - link
That's a freakin' awesome (if expensive) board!Btw THANK YOU THANK YOU THANK YOU for finally showing just how greatly sound enabled impacts the framerates on boards with on-board audio. Amazing that 17-19% of your CPU's power can be sapped by a stupid audio chip, especially when that turns into ~15fps drop in some games. Ugh.