Test Setup

The revised nForce4 SLI Intel Edition chipset now fully supports the dual core Pentium D processors in both stock and overclocked conditions. There were no issues with this board recognizing the two cores and four logical processors that are created with the Hyperthreading feature on this EE processor during testing. However, dual core really makes a difference in certain multi-tasking scenarios, as was demonstrated in the dual core performance preview. If you are interested in how the various chipsets perform in a real world multitasking setup, please take another look at that review.

The board’s memory was operated at 3-2-2-8-1T for the benchmarking suites and previous boards have been retested at this configuration and DDR2-667. This will be our standard test setting unless otherwise noted or the board fails to run at this speed. We also found that certain benchmarks scored better without Hyper Threading enabled, but in fairness, we felt that it was best to show consistent scores with this feature enabled as it is the main selling point of this processor model.

 Performance Test Configuration
Processor(s): Intel Pentium EE 840 (3.2GHz, 800FSB, Dual-Core, HT enabled, 2x1MB L2) utilized for all tests
Intel Pentium 820 (2.8GHz) for dual core verification
RAM: 2 x 512MB Corsair CM2X512A-5400UL revision 1.3 Settings- DDR2-667 as noted at (CL3-2-2-8-1T)
Hard Drive(s): 2 x Maxtor MaXLine III 7L300S0 300GB 7200 RPM SATA (16MB Buffer), 1 x Maxtor MaXLine III 7L300R0 300GB 7200 RPM IDE (16MB Buffer)
System Platform Drivers: NVIDIA nForce4 SLI Intel Edition 6.82
Video Cards: 1 x XFX 7800GTX OC (PCI Express) for all tests
2 x MSI 7800GTX (PCI Express) for SLI Verification
Video Drivers: NVIDIA nForce 78.01 for all tests; 81.85 for special results tests
Operating System(s): Windows XP Professional SP2
Motherboards: Asus P5N32-SLI Deluxe
Gigabyte GA-8I955X Royal
MSI P4N Diamond
Abit NI8 SLI
Gigabyte 8N SLI Quad Royal

ASUS P5N32-SLI Deluxe: Overclocking General Performance & Encoding
Comments Locked

70 Comments

View All Comments

  • Gary Key - Thursday, October 27, 2005 - link

    It is an awesome board.

    Thank you for the comments about the sound tests. We will be expanding this test suite greatly in the coming weeks. If you think BF2 has a hit, wait until you see the F.E.A.R. scores with sound effects at maximum. ;->
    However, in order to be consistent we will be testing the latest driver sets for each audio implementation along with adding an X-FI into the mix. The audio drivers within the latest NVIDIA 6.82 platform set are more game friendly than the RealTek versions but you give up some functionality and features for it.
  • yacoub - Sunday, October 30, 2005 - link

    Gary - don't know if you will see this or not, but it would be interesting to see how the X-Fi series Creative card compares to the BlueGears X-Mystique, which is a highly rated ~$90 audio card available from NewEgg among other sites that has an excellent featureset (of course it lacks the latest EAX that Creative keeps for themselves so they have a reason to sell their wares to gamers, but it has more Dolby-related 5.1 features than the X-Fi series).

    Would be neat to see those two cards compared in "% usage" of CPU during gaming.
  • Gary Key - Monday, October 31, 2005 - link

    Good Day,

    I have bought several cards the past few weeks including this one and the Chaintech AV-710. I intend to greatly expand the scope of audio testing on the board reviews due to the advances in on-board quality/drivers or the lack of in the nF4 area. I have a hard time understanding why most board manufacturers are shying away from C-Media as their on-board solutions always worked/sounded better than the RealTek AC97 counterparts. In the HD audio area it is a toss up in my opinion but I prefer the SigmaTel codec's on the Intel boards at this time including Intel's software packages. Hopefully I will be able to have the full audio section available in a couple of weeks. The next article series will have a little more information but is not representative of where we will be going in the future.

    I appreciate the comments and suggestions. I welcome anyone to email me if you have concerns or suggestions about our information. Obviously we have a format to adhere to and cannot test every possible hardware/software solution but I am always open to suggestions. :-)
  • yacoub - Thursday, October 27, 2005 - link

    Oh and dual true-16x PCI-E slots and the passive cooling are both incredibly desireable features. When the AMD version of the board comes out I'll be all over it provided it reviews as well as this one did.
  • Leper Messiah - Thursday, October 27, 2005 - link

    If the AMD version works as well as this one does for intel's, I've got my new mobo picked out. Heat pipe cooling+ 8 phase power= The win! 840EE's at 4.2 might actually give an overclocked X2 a run for its money! :gasp;
  • bob661 - Thursday, October 27, 2005 - link

    quote:

    840EE's at 4.2
    Except that EE's will run MUCH hotter than X2's. This isn't a big deal if you have your own nuclear reactor.
  • Gary Key - Thursday, October 27, 2005 - link

    quote:

    Except that EE's will run MUCH hotter than X2's. This isn't a big deal if you have your own nuclear reactor.


    It was not that bad on this board (a very good description from you), idle temps at 37c, 4.1GHz at 46c according to the bios readings. I believe they were very close as I had a duplicate setup with the MSI P4N in it and you could feel the difference with your hands near the case. We will have thermal tests in the near future.
  • Karaktu - Thursday, October 27, 2005 - link

    One thing I would REALLY like to see added to review articles is the total power consumption of the test setup, both at stock and overclocked settings. There are a couple of power supplies (Coolermaster, Thermaltake) that include attached wattage displays for convenience.

    This would be useful for a number of reasons, not the least of which would be an idea of how much it's going to cost you to run such a rig. ;)

    Joe
  • Gary Key - Thursday, October 27, 2005 - link

    Hi Joe,

    We have discussed this and it is nice to see a request for it. :-) Hopefully, once I have the test equipment setup then we can include these results in selected articles. You will find this information in the some of the CPU reviews already. We will also start checking thermal readings when a manufacturer introduces new technology onto the board. Asus did this with the eight-phase design and it certainly helped the thermal conditions on the board and with the CPU. This was based on a more subjective review of numbers generated from the bios and monitoring programs (along with overclocking results) which is okay for a high level discussion but is not detailed enough for absolute objective statements.

    Thank you.
  • breetai72 - Monday, October 31, 2005 - link

    I find it very hard to believe that this is an 8 phase vreg. Simply counting the inductors indicates that it's only a 5 phase. Can you post the VR controller part number so I can see the datasheet?

Log in

Don't have an account? Sign up now