Asus P5N32-SLI: Dual x16 - What Dreams Are Made On . . .
by Gary Key on October 27, 2005 12:05 AM EST- Posted in
- Motherboards
Ethernet Performance
The current motherboard test suite includes LAN performance measurements. All of these boards utilize PCI Express controllers with the only difference being the supplier of the core logic.
The Windows 2000 Driver Development Kit (DDK) includes a useful LAN testing utility called NTttcp. We used the NTttcp tool to test Ethernet throughput and the CPU utilization of the various Ethernet Controllers used on the nForce4 Ultra motherboards.
We set up one machine as the server; in this case, an Intel box with an Intel CSA Gigabit LAN connection. Intel CSA has a reputation for providing fast throughput and this seemed a reasonable choice to serve our Gigabit LAN clients.
At the server side, we used the following Command Line as suggested by the VIA whitepaper on LAN testing:
All standard Ethernet tests were performed with standard frames and the NVIDIA Active Armor suite disabled unless otherwise noted. Gigabit Ethernet supports Jumbo frames as well and will provide a further reduction in CPU overhead.
We added a further test scenario in which ActiveArmor was enabled on the Asus P5N32-SLI Deluxe board via the new 6.82 platform driver set. The throughput numbers increased by almost 3% while the CPU utilization dropped by over 7% with the standard settings enabled in the application. We also enabled Jumbo frames with ActiveArmor resulting in an increase in throughput numbers by 5% while the CPU utilization dropped by over 12%. We will be adding this benchmark testing to our standard test suite along with providing more information regarding the NVIDIA firewall solution in the near future. I highly recommend that if you have a NF4 based board, you should utilize ActiveArmor in its current configuration.
The current motherboard test suite includes LAN performance measurements. All of these boards utilize PCI Express controllers with the only difference being the supplier of the core logic.
The Windows 2000 Driver Development Kit (DDK) includes a useful LAN testing utility called NTttcp. We used the NTttcp tool to test Ethernet throughput and the CPU utilization of the various Ethernet Controllers used on the nForce4 Ultra motherboards.
We set up one machine as the server; in this case, an Intel box with an Intel CSA Gigabit LAN connection. Intel CSA has a reputation for providing fast throughput and this seemed a reasonable choice to serve our Gigabit LAN clients.
At the server side, we used the following Command Line as suggested by the VIA whitepaper on LAN testing:
Ntttcps - m 4 ,0, -a 4 - l 256000 - n 30000On the client side (the motherboard under test), we used the following Command Line:
Ntttcpr - m 4 ,0, -a 4 - l 256000 - n 30000At the conclusion of the test, we captured the throughput and CPU utilization figures from the client screen.
All standard Ethernet tests were performed with standard frames and the NVIDIA Active Armor suite disabled unless otherwise noted. Gigabit Ethernet supports Jumbo frames as well and will provide a further reduction in CPU overhead.
We added a further test scenario in which ActiveArmor was enabled on the Asus P5N32-SLI Deluxe board via the new 6.82 platform driver set. The throughput numbers increased by almost 3% while the CPU utilization dropped by over 7% with the standard settings enabled in the application. We also enabled Jumbo frames with ActiveArmor resulting in an increase in throughput numbers by 5% while the CPU utilization dropped by over 12%. We will be adding this benchmark testing to our standard test suite along with providing more information regarding the NVIDIA firewall solution in the near future. I highly recommend that if you have a NF4 based board, you should utilize ActiveArmor in its current configuration.
Facebook
Twitter
RSS
70 Comments
View All Comments
Gary Key - Sunday, October 30, 2005 - link
Asus will be clarifying the supported range of CPUs with the Lock Free setting. I noticed a difference this weekend on the retail board and bios with a CPU stepping range I thought was fully supported. I know the EE series all work properly, the balance I am not sure of at this time.
Gary Key - Thursday, October 27, 2005 - link
It will allow you to go down to 14x only in my testing. I did not have an issue with the dual core cpus down to 14x or raising the 820D to 16x. However, I have a single core cpu coming and will verify the settings with it. Please email me so I can repsond to you directly.Spacecomber - Thursday, October 27, 2005 - link
I think a more to the point intro would have been to ask whether a $250 motherboard can make up for the shortcomings in the current line of Intel desktop processors and make them more attractive to the computer enthusiast.Then again, maybe people who are sticking with their Prescotts really are dreamers.
Gary Key - Thursday, October 27, 2005 - link
Good point and one that Intel finally understands but we will have to wait until next summer to see the results. :) However, this board does make up for some of the current Intel CPU shortcomings and is truly an enthusiast board for Intel customers.tuteja1986 - Thursday, October 27, 2005 - link
Asus were leader once and i think are going to take the leader crown again: )They have been getting good success with:
Dual GPU 7800GTX
Now This motherboard
Also they are working on 7300 go
Good work and keep it up
Bozo Galora - Thursday, October 27, 2005 - link
reads like an ad for asuswho the hell would use a current Intel cpu?
not the 80% of the people who come to AT
I'll take the upcoming (delayed again) DFI NF4 Expert mobo, thank you
Gary Key - Thursday, October 27, 2005 - link
If it means anything, I purchased a pair of these boards after I completed the initial testing to replace a couple of systems in our household. I am that confident in the board and its ability.
About 80%+ of the buying public currently although the numbers are greatly skewed in their favor by large OEM and Retail sales. Actually, the newer Intel products are decent performers at a good price point. However, I completly agree that AMD owns the performance market and should receive wider credit for their efforts over the past couple of years.
Agreed, but sometimes it is good to visit the other side of the fence. A few short years ago your statements would have held true for people with AMD systems. ;-)
An excellent choice but while you are waiting you could purchase this board now. :-)
karioskasra - Thursday, October 27, 2005 - link
Dreams are made on an Intel platform? Did I miss something here...Gary Key - Thursday, October 27, 2005 - link
If you have an Intel CPU, then no, you did not miss anything. ;->I fully understand the performance and cost advantages the current AMD64 platform has over Intel. However, this should not dismiss the fact that the NVIDIA nForce4 SLI platform along with the implementation of it by Asus is an excellent solution regardless of CPU choice.
I personally own several AMD64 platforms but in reality you would be hard pressed at this time to tell the difference in performance between the two without benchmarks. I realize there will be a small population that can but overall an current Intel based system is fine for gaming and applications.
ksherman - Thursday, October 27, 2005 - link
I REALLY like the fan less northbridge cooling setup... Wish my DFI had one like it. Esp. since my Zalman 7700 will keep those heasinks nice and cool...