Intel 945P Motherboards: Going from Hopeless to Enthusiastic
by Gary Key on November 15, 2005 12:02 AM EST- Posted in
- Motherboards
ASUS P5LD2 Deluxe: Overclocking
FSB Overclocking Results
This board is an excellent overclocker, considering that our previous best FSB x 14 was at 253 on the Asus P5N32-SLI. At this overclock setting, the system was able to complete all of our benchmark test suites and also run Prime95 and SuperPI without issue. We were able to overclock the FSB to 275 at the14x multiplier, which resulted in CPU operation of 3850MHz, but we were unable to complete the benchmark test suite. However, even at this setting, the board was stable enough to complete most of the gaming benchmarks.
Memory Stress Tests
Memory stress tests look at the ability of the Asus P5LD2 Deluxe to operate at the officially supported memory frequencies of 667MHz DDR2 at the best performing memory timings that the Corsair CM2X512A-5400UL revision 1.3 will support.
The Asus P5LD2 Deluxe was completely stable with 2 DDR2 modules in Dual-Channel at the settings of 3-2-2-8 at 2.1V.
We will now install all four available memory slots, which are usually more strenuous on the memory subsystem than testing 2 DDR2 modules on a motherboard.
The Asus P5LD2 Deluxe was completely stable with 4 DDR2 modules in Dual-Channel at the settings of 3-3-3-8 and only needed the voltage increased to 2.15V. This is an excellent accomplishment and truly shows Asus's engineering capability.
FSB Overclocking Results
Front Side Bus Overclocking Testbed | |
Processor: | Pentium 4 Prescott LGA 775 820 Dual Core 2.8GHz |
CPU Voltage: | 1.4500V (1.3000V default) |
Memory Settings: | 3-2-2-8 at 667MHz |
Memory Voltage: | 2.2V |
NorthBridge Voltage: | 1.55V |
SouthBridge Voltage: | 1.05V |
Cooling: | Intel 840EE Heat Sink |
Power Supply: | OCZ Power Stream 520 |
Maximum CPU OverClock: | 267fsb x 14 (3739MHz) +34% |
This board is an excellent overclocker, considering that our previous best FSB x 14 was at 253 on the Asus P5N32-SLI. At this overclock setting, the system was able to complete all of our benchmark test suites and also run Prime95 and SuperPI without issue. We were able to overclock the FSB to 275 at the14x multiplier, which resulted in CPU operation of 3850MHz, but we were unable to complete the benchmark test suite. However, even at this setting, the board was stable enough to complete most of the gaming benchmarks.
Memory Stress Tests
Memory stress tests look at the ability of the Asus P5LD2 Deluxe to operate at the officially supported memory frequencies of 667MHz DDR2 at the best performing memory timings that the Corsair CM2X512A-5400UL revision 1.3 will support.
Asus P5LD2 Deluxe Stable DDR667 Timings - 2 DIMMs (2/4 slots populated - 1 Dual-Channel Bank) |
|
Clock Speed: | 200MHz (800FSB) |
Timing Mode: | 667MHz - Default |
CAS Latency: | 3 |
RAS to CAS Delay: | 2 |
RAS Precharge: | 2 |
RAS Cycle Time: | 8 |
Voltage: | 2.1V |
The Asus P5LD2 Deluxe was completely stable with 2 DDR2 modules in Dual-Channel at the settings of 3-2-2-8 at 2.1V.
We will now install all four available memory slots, which are usually more strenuous on the memory subsystem than testing 2 DDR2 modules on a motherboard.
Asus P5LD2 Deluxe Stable DDR667 Timings - 4 DIMMs (4/4 slots populated - 2 Dual-Channel Banks) |
|
Clock Speed: | 200MHz (800FSB) |
Timing Mode: | 667MHz - Default |
CAS Latency: | 3 |
RAS to CAS Delay: | 3 |
RAS Precharge: | 3 |
RAS Cycle Time: | 8 |
Voltage: | 2.15V |
The Asus P5LD2 Deluxe was completely stable with 4 DDR2 modules in Dual-Channel at the settings of 3-3-3-8 and only needed the voltage increased to 2.15V. This is an excellent accomplishment and truly shows Asus's engineering capability.
26 Comments
View All Comments
Houdani - Tuesday, November 15, 2005 - link
My approach is not backwards in the least. It's mainstream. And I do support the status quo because it's not broken. Your argument is that you want to see how sound affects gameplay ... period. For that, you should go read soundcard reviews.If you are arguing that CardB will suffer more than CardA due to the sound solution, then clearly I've missed something significant!
yacoub - Tuesday, November 15, 2005 - link
No, not "period". At all. I want to see real world tests of GPUs so I can see how ALL expected impacts during gaming affect the latest and greatests GPUs, especially in light of conclusions in many reviews pointing out that "buy the best GPU you can afford" is the answer for gamers and GPUs are the most expensive piece of equipment in most cases since $200 CPUs can are enough for most cases.
It's necessary to know if, in light of the real world impacts like sound processing, that X800XL that looks like it can push enough fps in the GPU-exclusive testing done on it, actually falls beneath a playable threshhold in your machine at the games/resolutions/graphical settings the review showed to be fine. A 15fps difference is clearly HUGE (especially when most cards reviewed are pushing 30-50fps in most tests) and can EASILY push a seemingly sufficient card into the slideshow/stuttering realm of "holy crap that review screwed me big time. I should have sacrificed the extra $50 to jump up to CardB". If anything these dick-waving reviews are HARMFUL to actual consumers concerned with upgrading their gaming rigs as opposed to techies simply interested in reading about the latest GPU, because many of them don't even mention that sound is off and why that can have a big impact on the actual gaming performance of the card. They might waste time and money on an upgrade because the review data was worthless compared to how it actually performed in their system.
Food for thought.
MadAd - Tuesday, November 15, 2005 - link
This is a mobo review and OB sound is on mobos so it has a place being tested here, not on GFX cards.In the context of current reviews, you want a change to the established way of doing things so that some finite aspect of sound card performance can be included, thats your opinion and fair enough you can have it. However rather than argue that the (perfectly good for most) system should be changed, instead why dont you ask the AT reviewers for a comparitive system review including sound?
If its worthwhile doing im sure one of the reviewers would agree, perhaps a few other readers would back you up if they think it would make a difference however I'm in the 'keep the status quo' camp so am biassed thinking its really not worth the time when it can be predicted from seperate reviews.
yacoub - Tuesday, November 15, 2005 - link
Here's a vague comparison: Measuring automobile horsepower at the crank instead of the wheels - it ignores drivetrain loss and isn't as accurate a measurement. This is why the industry recently mandated a revised rating system. Yes, most cars will now market a must lower (but more accurate) number for their horsepower rating.The GPU review industry needs to start doing the same thing. Give more accurate numbers so the consumer is better infomred and can actually use the reviews to make a solid purchase decision. After all, that's what reviews started out to do years ago - help consumers understand the features of new hardware AND how they actually performed playing the games people played, so people could decide what the best upgrade strategy would be for their system based on worthwhile data.
TheInvincibleMustard - Tuesday, November 15, 2005 - link
I saw that graph with min/max/average framerates! Woohoo! Convince others to implement that as well, especially in video card reviews (*cough*7800 GTX 512*cough*) :DIt's a shame that the Foxconn only goes up to 1.9v, as everything else about the board seems really decent ... is there word from Foxconn that this might be possible to fix in a future BIOS upgrade, or is it a hardware-specific issue?
-TIM
Gary Key - Tuesday, November 15, 2005 - link
The board is very solid, has an excellent price point, and we are hoping Foxconn will implement further changes in their bios in the near future. I will update the article if we receive a new one.
Furen - Tuesday, November 15, 2005 - link
You know you don't have to throw a long quote at the beginning of each article, right? I mean, it seems a bit excessive... like you're trying too hard to link the article to the grand scope of human life. We all appreciate an article's technical merits (this is a tech site, after all) but reading a piece of philosophy or literature at the heading kind of grows old after one or two times (dare I say, it reminds me of Omid at THG and his latin-infused writings so many years ago). I'm not complaining about the article, by the way, maybe I'm just being anal...Kensei - Friday, November 18, 2005 - link
I'm way late to this party but here goes anyway. I couldn't disagree more. It makes for much more interesting reading and the linkages to literature are a very minor part of each article. As I've said before, Gary is an extremely talented writer and others should be learning from his example. I strongly feel that people with strong technical interests need to spend time in other pursuits to make them more well rounded persons. I could write a book on the people I've met who possess great technical knowledge but it does them little good because they lack the interpersonal and communication skills to convey it to any other carbon-based life form.So dust off that copy of Jane Austin's Pride & Predjudice in your sister's room and see how the other half lives..... OK.... just go see the movie.
Kensei
Gary Key - Saturday, November 19, 2005 - link
I appreciate your comments and you made my evening. My sister was named after Elizabeth although she acts more like Mr. Darcy in real life. I might just pull out the 1996 BBC rendition (reminds me of my Rendition Verite based Reactor 3D card I found recently) and view it over the holidays. :) :) :) :)
Gary Key - Tuesday, November 15, 2005 - link
I appreciate the feedback. I flip flop at times about the quotes myself but figured it would provide a difference in the article besides starting out with same, "Intel introduces the 945P, a chipset that is very good, and is in three boards today....", syndrome. However, I can see your point where it can grow old after a few times also so maybe we should mix it up at various times. ;->