Asus A8R-MVP: Mainstream Rocket
by Wesley Fink on November 23, 2005 1:15 AM EST- Posted in
- Motherboards
Graphics Performance and Encoding
It is interesting that the ATI X1800XT wins all synthetic benchmarks using the latest 5.11 Catalyst drivers. The 5.11 drivers do make the X1800XT behave like a different vidoe card.
Encoding results should not be affected by the graphics card used during the encoding benchmarks. This is clearly demonstrated by the archive test results for AutoGK using an AMD 4000+ processor with a wide assortment of other components. The performance range of those encoding tests is just 48.1 to 49.9 - a difference form high to low of just 0.8 frames. Clearly, the biggest influence on this encoding benchmark is the CPU used for testing.
It is interesting that the ATI X1800XT wins all synthetic benchmarks using the latest 5.11 Catalyst drivers. The 5.11 drivers do make the X1800XT behave like a different vidoe card.
Encoding results should not be affected by the graphics card used during the encoding benchmarks. This is clearly demonstrated by the archive test results for AutoGK using an AMD 4000+ processor with a wide assortment of other components. The performance range of those encoding tests is just 48.1 to 49.9 - a difference form high to low of just 0.8 frames. Clearly, the biggest influence on this encoding benchmark is the CPU used for testing.
Facebook
Twitter
RSS
74 Comments
View All Comments
james007 - Thursday, February 16, 2006 - link
Hi, I deeply appreciate the hard work and thought that went into this article. I'm not a 'gamer' though -- I'm trying to select the fastest available mobo for software development. Visual Studio 2005 is a dog, dawg! I don't mind dropping a few hundred for speed.. so what are y'all's thoughts: what's the fastest mobo? A8R-MVP, or A8N32-SLI? Or another board?+ I'm still trying to select the snappiest hard drive. SCSI (like, Cheetah) or Sata?
Thanx for your advice and for lending us the benefits of your experience.
JH
htcstech - Wednesday, February 1, 2006 - link
Apologies for my ignorance, but did you test the motherboard overclocked or as standard?If either OC or standard, have you posted the other results?
Thanks
superkdogg - Monday, January 16, 2006 - link
Hey Wes,Did you really get that 325x9 @ 1.300 vCore like the screenshot on the first page says?
If so, you had a fantastic setup going. I'm looking forward to getting my board (despite the numerous complaints about vCore not as advertised). I can deal with the memory issues (real or user-based) because I'm still rocking the Corsair VS with dividers anyway.
tanstudio - Thursday, January 12, 2006 - link
I have a a8r mvp and opteron 146 running stable at 2.6G with 1.45V. I can boot into 2.7G but soon windows hangged. And the max cpu voltage I can have is 1.45V with this motherboard. It would be great if the board can have 1.5-1.65 v cop voltage so my opteron 146 may have a chance to hit 2.8G with 1.5V or 1.55V core voltage.Beenthere - Sunday, January 8, 2006 - link
As many people who have purchased the A8R-MVP Mobo have sadly discovered, there are some serious issues with the production Mobos that Anandtech did not experience with their review board. Specifically the Mobo does NOT provide CPU Vcore voltages above 1.40V and many if not most people who have purchased this Mobo have been unable to run memory at 1T above 250 MHz even though the same memory runs fine on other Mobos above 250 MHz at 1T with no problem. The voltage issue is serious because Asus clearly advertises the A8R-MVP for use with all socket 939 Athlon / FX / X2 CPUs, which of course is impossible as the (CG) Clawhammer core chips require a MINIMUM 1.50V, which isn't even an option on the A8R-MVP Mobo.After careful review of a number of factors I have a suspicion that the A8R-MVP has limited Vcore current capacity and that is why Asus has refused to provide the proper voltage options in the BIOS. I suspect after they produced the Mobo they discovered the shortcoming and so limited the voltage options because the current draw increases as you O/C the CPU, which is only possible if you can raise the voltage, in most cases. This is just my theory but if Asus could provide the proper CPU voltages for the CG core CPUs then you'd have thought after two BIOS updates they would have...
From my perspective this is simply unacceptable as any Clawhammer based CPU requires a minimum 1.50V per AMD. Asus has advertised the A8R-MVP as being fully Athlon / FX / X2 compatible and even states in their online Tech Section that the FX-55 and 4000+ are fully supported on this Mobo - which of course they ARE NOT as they require a MINIMUM 1.50V, which is not even an option on the A8R-MVP.
My suggestion is that people STOP BUYING THIS MOBO if you need a minimum 1.50V Vcore. Anyone who can return their A8R-MVP under warranty would be advised to do so. If you have an FX-55 or 4000+ that requires 1.50V per AMD, then you can't run it on this Mobo despite Asus' claims of fitment. That's my view of things based on what I see and I'd suggest potential purchasers of this Mobo be advised of the unusually low CPU voltage options PRIOR to purchase as you may need to return the Mobo if your CPU requires 1.50 or more volts to function properly.
Wesley Fink - Sunday, January 15, 2006 - link
Your information is not completely true - but you already know this. The vCore of the A8R-MVP varies according to the CPU installed. It does NOT stop at 1.4V with a Clawhammer. The range available varies with the CPU and is always 0.0v to 0.1v more than the default voltage of the CPU. When we tested the board Asus advised that the additional overvolt option in the BIOS added 0.2V more vCore. After measuring several boards the actual addition of the overvolt jumper is 0.1V.The range is not quite as wide as what we initially reported, but it is not nearly as limited as what you report. If you plan to post this in every Forum that mentions the A8R-MVP you need to at least get your facts correct. The limit is not 1.65V with a 1.45V processor, but it is alos not the 1.4V you imply. Fo most recent AMD processors increasing vCore does little for overclocking anyway. You are better off using the chipset and HTT overvolt. No doubt many would welcome a range to 1.7V, but the design of the A8R-MVP does not make that a likely prospect. I also did not need the much higher vCore to reach 325FSB in my testing.
What I am finding in emails is about half can duplicate results I found, while the other half have difficulty getting above 250-260. It does appear there may be quite a bit of variation in the OC performance of the shipping RD480 chipsets - and that there are chipsets out there that OC well and half that don't overclock as well.
dlxhammer - Tuesday, January 10, 2006 - link
Thanks for the info Beenthere, but sadly i have already ordered this mobo, along with an x1800xt. I WAS planning on using my current cpu (amd 3500 clawhammer) and you are correct the voltage is 1.5Maby its time to upgrade my cpu:\ I notice the AMD dual core processors require 1.35-1.4 volts would this be a wise choice? maby ill give my current cpu a shot 1st...
tmodel37 - Monday, December 19, 2005 - link
Hi Wes,Since I cannot find the A8n32 SLI Deluxe anywhere, the A8n-MVP sounds great, but I already have 2 7800GT's. Where can I get the hacked drivers? I am 68 yr. old newbie, and need all the help I can get.
Ryan Norton - Monday, December 12, 2005 - link
Feedback thread:http://forums.anandtech.com/messageview.aspx?catid...">http://forums.anandtech.com/messageview...9&th...
I took it up to 325HTT last night in 5MHz increments and let it run Memtest all night, still rock solid. A couple anomalous BIOS setting options, however.
AllanLim - Sunday, December 11, 2005 - link
And am proceeding wring some performance from it. Question is Wes, how were you able to get 325x9 with the current BIOS options.Rgds