Intel X58 Motherboard Roundup - What does $300 Get You?

78 Comments

View All Comments

• whb456 - Monday, April 20, 2009 - link

  They should be paying you for all the hard work you're doing for them. ;-)

• rreuscher - Thursday, February 19, 2009 - link

  Hi,
  
  I don't know if this the right place to post this comment, but I try it.
  I read that you always perform DPC latency tests in all your reviews, I'm missing this results for this Gigabyte X58-UD5 board.
  I build last week a system with an i7/920 CPU (Bios F4) but the DPC latency is a nightmare (my dual core 4 year old laptop outperforms this system). I'm using/intended this machine for dedicated Real Time Audio production, which means I need a steady DPC latency.
  The system shows very low DPC latency values with WIN XP and hyperthreading off (about 4 us), but with constantly spikes reaching up to 8000 us, and this is a killer.
  
  Did you did some testing on this also ?
  
  Kind regards, Rene Reuscher

• sahina - Tuesday, January 27, 2009 - link

  I am looking for 4GB memory sticks for this board but the only one in QVL is S10C1 4GB Samsung M378B5273BH1-CF8 DS Samsung K4B2G0846B HCF8. This is DDR3 1066. I can not find it for sale in the market.
  
  Has anyone tested this board with 24GB RAM?

• Twoboxer - Monday, January 26, 2009 - link

  Anand, your comments represent a start, but . . .
  
  If you are not part of the solution, you are part of the problem. Unfortunately, there is very little grey area between "reviewer" and "shill".
  
  1) Ask mfgs to submit samples by Date X.
  2) Test until the board will go no further.*
  3) Publish report.
  4) Rinse and repeat to recognize and publicize improvements, if any.
  
  * If you want to make ONE phone call to each manufacturer, fine.
  
  Allowing mfgs to cherry-pick parts is concession/advantage enough. ONE phone call is honorable. More than that is a disservice to your readers, and denies you your supposed purpose as a reviewer. The time saved during your first review will more than cover rinse/repeat.
  
  In practice I can often get a better idea of what parts to buy after reading a couple of dozen consumer in-use reviews on, for example, Newegg.
  
  You may find it painful or difficult to change course, but you are now at least on the right path. IMO, you can either continue on the return path to "reviewer", or watch Newegg become the de facto replacement for much of your work.

• aussie greg - Saturday, January 24, 2009 - link

  I want to join the chorus of 'cFoo' and probably many others.
  What you [Anand] have to say about all the 'SNAFU'S' relating to these boards, have been going on with many other boards for years, My Asus P5 would not work until the 3rd bios update and then failed shotly after...by the time it was replaced updates had reached 12...in 10 months! I was without a fully working mobo for 7 months!
  It's not good enough, it's actually pathetic dishonest performance by the manufacturers and probably worth investigating by a relevant govt. authority. Anandtech...and others, should bite the bullet and name names, in detail.
  Maybe if some of these companies got the kick up the arse [with apologies] they deserve, we consumers would be better off.
  Ausssie Greg

• Eru The One - Tuesday, January 20, 2009 - link

  I have been pouring over reviews for the last three days comparing any x58 motherboard review I can find. I feel i've narrowed my choice down to the Gigabyte Extreme but I have yet to see anyone comparing DFI's new x58 against anything.
  
  I think I should wait before I see someone doing this before I make my final choice. Can you guys at AnandTech help me out here?

• tyaiyama - Wednesday, December 17, 2008 - link

  I am planning to build a system using P6T Deluxe:
  Pro: ATX form factor not E-ATX(previously?)
  PATA is implemented by Marvel 88SE6111
  Dual GbE
  Triple channel DDR3
  True16+2 Phase Power Design
  100% High-quality Japan-made Conductive Polymer Capacitors
  Con: Max memory 12 GB
  3rd PCIe 2.0 x16 (not usable)
  SAS Onboard
  Some people may say FDD connector is not necessary, but I need it. I use SATA for all drives; thus I actually do not need PATA, but just in case. Triple channel DDR3 4GB module will be available next month. Since i7 is the memory controller at the same time, what maximum size does it support? I know it is at least 128GB. Through BIOS upgrade, can we use 24GB or more memory in P6T?

• cFoo - Sunday, December 14, 2008 - link

  Anand, I hope one day you will decide to let the cat out of the bag. Post all the problems and the manufacturer's name beside them. I understand that would risk them from giving you exclusive early access to the boards. But we desperate need accountability. You cannot let them stomp all over fair and accurate journalism.
  
  Accountability now! I'm sick of spending $300+ dollar and waiting 1-2 months for fixes. If I wanted to do that, I'll rather wait 1-2 months to buy the board for $100 cheaper!

• mwm - Friday, December 12, 2008 - link

  Thanks, Anand; I really appreciate the valuable info regarding your experience with partially-DOA motherboards. Where else would be get this information? How many hours would it take a builder to run down the problem? We don't have the bench or knowledge resources to do that. So we are just screwed.
  
  Keep up the good work. (I'd even like to see a cheat-sheet on exactly what did not work on a board: a little embarrassment and no sale from guys like myself might prompt them to pay more attention.)
  Yours,
  mwm

• woodworker72 - Wednesday, December 10, 2008 - link

  What happened to the Rampage II review? I see the detailed review of the P6 from ASUS. There was a review a few weeks ago that lacked details due to legal restrictions, but what about now? Thanks!